A-1 Renovations

Dedicated to excelence

By Alisher Ishankulov, owner of A-1 Renovations LLC, MHIC #110394. Updated November 2026.

Many homeowners in Baltimore County use their bathtub only as a shower. If that sounds like your home, a tub to shower conversion can make the bathroom easier to use, easier to clean and safer to step into.

We remove the old tub and build a walk-in shower in the same space. Most conversions take 2 to 8 working days, depending on the type of shower.

We do tub to shower conversions across Baltimore, Howard, Carroll and Harford counties. Below we explain what the job costs, which permits it needs, and the choices you will make along the way.

What Does a Tub to Shower Conversion Cost in Baltimore?

The price depends mostly on two things: the type of shower you choose, and whether the drain has to move.

Prefab acrylic base and wall panels
$6,000 – $10,000
Tub removal, new acrylic base, panel walls, new valve and trim, glass door.
Authorized dealer
UpHome solid composite stone system
$8,000 – $13,000
Tub removal, stone base and grout-free stone walls, new valve and trim, glass door.
Custom tiled shower with curb
$10,000 – $18,000
Waterproofing membrane, tile walls and floor, niche, glass.
Curbless (zero-entry) tiled shower
$15,000 – $25,000
Lowered subfloor, linear drain, full waterproofing, tile, glass.

For comparison, Angi's Baltimore cost guide puts an average tub to shower conversion at $1,570 to $8,360 and a walk-in shower at $6,270 to $12,540. Online averages often leave out rot repair, plumbing changes and permits, so get a written quote after someone has looked at your bathroom.

These things raise the price:
  • Moving the drain, or switching from a regular drain to a linear one
  • Rotten subfloor or joists under the old tub. This is common in older homes, where small leaks go unnoticed for years.
  • Floor-to-ceiling tile, large-format tile or natural stone
  • Frameless glass instead of a framed door
  • Older rowhouses with tight access and old cast-iron pipes

Do You Need a Permit?

Usually, yes. In Baltimore County, a bathroom remodel that changes plumbing, wiring or framing needs a permit from the Department of Permits, Approvals and Inspections (PAI), plus plumbing and electrical permits. Swapping fixtures in the same spot is generally exempt, but a tub to shower conversion almost always replaces the valve and changes the drain. Licensed plumbing and electrical contractors must do that trade work.

We handle permits for you. We pull the permits for every job that needs them and schedule the inspections. Ask any contractor you are comparing whether their quote includes permits. Also check their MHIC license on the Maryland Home Improvement Commission website.

Which Shower Is Right for You?

Prefab acrylic panels
Go in fastest, cost the least and have no grout to clean. They work well for a hall bath, a rental or a tight budget.
UpHome solid composite stone Authorized dealer
Sits between acrylic and tile. A-1 Renovations is an authorized UpHome dealer. The base and walls are made in the USA from solid composite stone, which is stronger than acrylic and has no grout lines to clean. The base is only 1-1/8 inches tall, so stepping in is easy, and the surface has a slip-resistant texture. The panels go up in 1 to 2 days and carry a limited lifetime warranty from the manufacturer. It is a good choice if you want the look of stone without the time and cost of a full tile job.
Custom tile
Costs more but can fit any size, add a built-in niche or bench, and be built with no curb at all. It suits a primary bath or a home you plan to stay in.
Curbless (zero-entry)
The safest choice for aging in place. There is nothing to step over, and a wheelchair or walker can roll in. The floor has to be lowered or sloped so water still runs to the drain, and that is skilled work.

How the Job Goes, Step by Step

1
Free in-home estimate. We measure, check the floor and pipes, and talk through options. You get a written quote.
2
Design and order. You pick the base, walls or tile, fixtures and glass. Custom glass is measured after the walls are done and usually takes 1 to 2 weeks.
3
Permits. We file with the county when the job needs it.
4
Demolition. We remove the tub and wall surround and protect the rest of the house from dust.
5
Plumbing and repairs. We install the new valve, move the drain if needed, and fix any damaged subfloor.
6
Waterproofing. Every shower gets proper waterproofing behind the walls before anything goes on. This step decides whether a shower lasts 5 years or 25.
7
Walls and base, then fixtures. Tile, UpHome stone panels or acrylic panels go in, then the valve trim and showerhead.
8
Glass and final inspection. We install the door or panel, pass inspection and walk you through care.

Should You Keep at Least One Tub?

If your home has only one bathtub, think about resale before you remove it. Many local real estate agents say families with small children look for at least one tub. If you have a second bathroom with a tub, or plan to stay in the home long-term, converting is usually an easy choice.

Safety Upgrades Worth Adding

While the walls are open, it costs little to add blocking for grab bars, even if you don't install the bars yet. Other good additions are a handheld shower on a slide bar, a fold-down or built-in bench, and a non-slip floor.

Common Questions

How long does a tub to shower conversion take?

An acrylic or UpHome stone install usually takes 2 to 4 days. A tiled shower takes 5 to 8 working days, plus waiting time for custom glass.

Can I use my bathroom during the work?

Not the shower. Plan to use another bathroom for the length of the job.

Will the new shower fit in the same space as my tub?

Yes. A standard tub is about 60 by 30 inches, and the shower is built in that same footprint. Some homeowners make it wider by taking out a linen closet next to it.

Do you offer financing?

Yes. Ask about financing options during your free estimate.

Request Your Free Tub to Shower Estimate

Tell us about your bathroom and we will contact you to schedule a visit.

Get a Free Estimate

A-1 Renovations is a licensed and insured remodeling contractor based in Reisterstown, MD (MHIC #110394), and an authorized UpHome dealer. We do tub to shower conversions throughout Baltimore County, Baltimore City, Howard, Carroll, Harford and Anne Arundel counties.

Call (443) 622-1926 Request a Free Estimate

See more of our work on our bathroom remodeling page.

Areas We Serve


Ellicott City, MD      Cockeysville, MD           Fulton, MD 

Towson, MD            Owings Mills, MD         Bowie, MD 

Columbia, MD         Reisterstown, MD          Edgewood, MD

Eldersburg, MD        Bel Air, MD                  McLean, MD
Pikesville, MD          Timonium, MD             Phoenix, MD

Clarksville, MD        Aspen Hill, MD             Crofton, MD

Silver Spring, MD     Catonsville, MD            Parkville, MD

Hampstead, MD       White Marsh, MD          Rockville, MD

Westminster, MD      Upperco, MD                Laurel, MD

Finksburg, MD         Sykesville, MD               Odenton, MD

Fallston, MD            Perry Hall, MD              Elkridge, MD

Aberdeen, MD          Randallstown, MD         Bethesda, MD 

Mcdonogh, MD        Worthington, MD          Sparks, MD

Windsor Mill, MD     Milford Mill, MD          Jessup, MD

Woodstock, MD        Glen Burnie, MD          Gambrills, MD

Baltimore City, MD   Glyndon, MD               Gwynn Oak, MD 

Mays Chapel, MD